Por favor, use este identificador para citar o enlazar este ítem: http://repositoriodigital.ipn.mx/handle/123456789/10685
Registro completo de metadatos
Campo DC Valor Lengua/Idioma
dc.creatorTREJO, FERNANDO-
dc.creatorRANA, MOHAN S.-
dc.creatorANCHEYTA, JORGE-
dc.date2012-03-16T21:24:35Z-
dc.date2012-03-16T21:24:35Z-
dc.date2008-
dc.date.accessioned2013-01-16T09:04:43Z-
dc.date.available2013-01-16T09:04:43Z-
dc.date.issued2013-01-16-
dc.identifier0920-5861-
dc.identifierhttp://hdl.handle.net/123456789/167-
dc.identifier.urihttp://www.repositoriodigital.ipn.mx/handle/123456789/10685-
dc.descriptionThree different supports were prepared with distinct magnesia–alumina ratio x = MgO/(MgO + Al2O3) = 0.01, 0.1 and 0.5. Synthesized supports were impregnated with Co and Mo salts by the incipient wetness method along with 1,2-cyclohexanediamine-N,N,N0,N0-tetraacetic acid (CyDTA) as chelating agent. Catalysts were characterized by BET surface area, Raman spectroscopy, SEM-EDX and HRTEM (STEM) spectroscopy techniques. The catalysts were evaluated for the thiophene hydrodesulfurization reaction and its activity results are discussed in terms of using chelating agent during the preparation of catalyst. A comparison of the activity between uncalcined and calcined catalysts was made and a higher activity was obtained with calcined MgO–Al2O3 supported catalysts. Two different MgO containing calcined catalysts were tested at microplant with industrial feedstocks of heavy Maya crude oil. The effect of support composition was observed for hydrodesulfurization (HDS), hydrodemetallization (HDM), hydrodeasphaltenization (HDAs) and hydrodenitrogenation (HDN) reactions, which were reported at temperature of 380 8C, pressure of 7 MPa and space-velocity of 1.0 h 1 during 204 h of time-on-stream (TOS).-
dc.descriptionhttp://www.sciencedirect.com/science/article/pii/S092058610700692X-
dc.languageen_US-
dc.publisherCatalysis Today-
dc.subjectChelating agents-
dc.subjectMaya crude hydrotreating-
dc.subjectAl2O3-MgO supported catalysts-
dc.titleCOMO/MGO-AL2O3 SUPPORTED CATALYSTS: AN ALTERNATIVE APPROACH TO PREPARE HDS CATALYSTS-
dc.typeArticle-
Aparece en las colecciones: Doctorado

Ficheros en este ítem:
Fichero Descripción Tamaño Formato  
art 1.pdf70.82 kBAdobe PDFVisualizar/Abrir


Los ítems de DSpace están protegidos por copyright, con todos los derechos reservados, a menos que se indique lo contrario.