Por favor, use este identificador para citar o enlazar este ítem: http://repositoriodigital.ipn.mx/handle/123456789/21615
Título : Optimal conditions for the deposition of novel anticorrosive coatings by RF magnetron sputtering for aluminum alloy AA6082
Fecha de publicación : 29-jul-2015
Citación : Journal of Alloys and Compounds;Volume 615, Issue S1, 15 January 2015, Pages S437-S443
Resumen : Cerium and lanthanum coatings were deposited on glass, silicon (1 0 0), and aluminum alloy by RF magnetron sputtering in which several experimental conditions such as power, substrate temperature, and deposition time were varied, using pure CeO2 and La2O3 targets. The effect of deposition parameters on the bonding structure, surface morphology and properties against corrosion of rare earth (RE) coatings formed on metallic substrate was reported. The microstructure and chemistry of the thin film were characterized by X-ray diffraction (XRD), Scanning Electron Microscopy (SEM), and X-ray photoelectron spectroscopy (XPS); whereas their use as corrosion resistant coatings was studied in aqueous NaCl solution (3.0 wt%) by using polarization curves. Variations in these properties were observed by increasing the substrate temperature which modifies the crystallinity of the rare earth coatings. XRD and XPS findings indicate that the cerium coatings are composed by CeO2 and a significant quantity of Ce2O3 due to oxygen deficiency in the sputtering chamber, whereas La2O3/La(OH)3 and some La intermetallic compounds are detected in the lanthanum films. Variations in the Ecorr and Icorr were found as a function of the thickness, texture, and morphology of the as-prepared coatings. © 2014 Elsevier B.V. All rights reserved.
URI : http://www.repositoriodigital.ipn.mx/handle/123456789/21615
ISSN : 09258388
Aparece en las colecciones: Artículos

Los ítems de DSpace están protegidos por copyright, con todos los derechos reservados, a menos que se indique lo contrario.